Add Your Shipping Box Weight and Dimensions through InventoryLab

After entering your box content information, you have the option to input your box weight and dimensions for SPD shipments.

Note: LTL shipment box weight and dimensions need to be done in Seller Central. In addition, if you have more than 110 boxes in your shipment, or are not using a partnered carrier, your box weight and dimensions will need to be entered in Seller Central.

Adding Your Shipping Box Weight and Dimensions

Editing Your Shipping Box Weight and Dimensions

Adding Your Shipping Box Weight and Dimensions

Once you transmit your box content information for your shipment, a box dimensions pop-up will appear.

If you transmit the box content for shipments separately or only have one shipment for a batch, the pop-up will appear as shown below:

You can enter the dimensions for each box individually, or at the same time using the "All Boxes" section.

If you choose to transmit box content for all shipments in a batch, you'll be able to enter the weight and dimensions for all of the shipments at once as shown here:

Once you're finished entering the weight and dimensions for all the boxes, click Submit All, and wait a few moments for a green Success message in Stratify.

At this point, you should see that the weight and dimensions populated for the boxes when checking the shipment in Seller Central, and you can proceed with calculating shipping charges and printing your shipping labels.

If you would prefer to enter weight and dimensions for your boxes in Seller Central, click Skip this Step to transmit your box content information without them.

If you attempt to enter box weight and dimensions for a Hazmat shipment, you will be prompted to click Skip this Step in order to enter them in Seller Central. 

For more information, please see Providing Box Weight & Dimensions for a Hazmat Shipment

Editing Your Shipping Box Weight and Dimensions

If you need to edit your shipping box weight and dimensions, or skipped the step previously and are ready to enter them in Stratify, navigate to List>List & Prep and click the three horizontal lines next to the shipment in the Working Shipments window. Then, click Box Content Information.

From there, click Transmit Updated Boxes to get back to the weight and dimensions pop-up to make adjustments and submit them to Amazon.